At Community Fibre, we are dedicated to ensuring our customers get what they pay for. As such, we need to ensure you are receiving the correct speeds which correspond to your chosen package.
The first thing we need to take into consideration is how we are connecting to the internet. Most customers connect through Wi-Fi as it is more convenient than having a cable connection obstructing the property. Although Wi-Fi has the advantage of convenience, it has the disadvantage of reliability.
For the expected speeds over WiFi please see this article.
It is possible to reach great speeds in one room and not be able to connect at all in another room.
In regard to the Wi-Fi frequencies – 2.4GHz and 5GHz, we need to keep in mind that, although 5GHz is faster in principle, it is much more difficult for the signal to pass through walls and also it’s subject to more interference. On the flipside, 2.4GHz will provide speeds up to 450Mbps-600Mbps while still having a much easier time going through walls and combating interference from other devices.
In most cases, moving the router to another location (away from electrical devices and larger metal objects) will noticeably increase the signal strength in some places of your home.
To retrieve the most accurate results, we are required to test with an Ethernet cable. Please connect your laptop to LAN1 on the home gateway and perform a speed test online (via. Speed Test) while specifying ‘Community Fibre Limited’ as your provider, as below:
If speeds are much slower than expected – please perform a hard reset on the router by inserting a pin or needle into the reset hole (located on the side of the device) for at least 20 seconds.